BREEZAIR TBS

Features

(BREEZAIR TBS)

Evaporative cooling is a process that has been used throughout history – thousands of years ago.

An evaporative air cooler takes advantage of this natural process. Each Breezair cooler contains large cooling pads soaked with water. Hot ambient (outside) air is passed through the cooler with a quiet but powerful fan.

Catalog Technical Specification Enquiry

Specification

Model

TBS 580

Airflow @ 80 Pa

10010 m3/h

Cooling Capacity

16.8 kW

Power consumption (total)

1210 Watts

Power - rated (W)

25

When hot air passes through the wet pads, the water absorbs the heat from the hot air as it passes through the wet pads, the water absorbs some of the heat as it evaporates. The cooled and fresh air is distributed into the building.

The natural evaporation method cools the air, while the pads filter out dust, pollen, and other contaminants. This natural method makes the air cooler, cleaner, and, fresher without using any toxic chemicals.

As the air blows through the pads water is evaporated and the heat in the air is absorbed.
Hot outside air is pumped through water-soaked pads.
This lowers the humidity of the air, which is then pushed to the whole building causing a cooling effect.

Benefits

FOR COMMERCIAL & AND INDUSTRIAL SPACES:
Breezair Industrial Evaporative Cooler is recognized as a standard for cooling large areas. This Industrial Ducting Cooler can replace traditional A/C system which runs on high capital.

SAVING ON RUNNING COSTS:
A Breezair system uses up to 87% less energy than regular air conditioning systems. The only consuming components of an evaporative cooler are the fan and a water pump.

100% FRESH, NOT RECIRCULATING AIR:
Traditional A/C systems rely on recirculating the air inside the building which results in an impure and contaminated air supply in large industries. Evaporative cooling always uses fresh air from outside.

EASY TO MAINTAIN AND INSTALL:
Breezair’s Industrial Ducting coolers do not use a compressor or chemical refrigerants to cool the air, so they are simple to install and even easier to maintain.

GREEN TECHNOLOGY:
Evaporative cooling systems do not contain harmful synthetic refrigerants like other refrigerated systems, which use potent greenhouse gases like hydrofluorocarbons or chlorofluorocarbons, which deplete the ozone layer.

ONLY WATER USED:
Evaporative coolers run on water and electricity. The WATER Manager TM system senses water quality with a probe that sends a signal back to the electronic module, which then ejects some dirty water and allows fresh water to enter